overview
bp metal markers lc metal markers m metal markers f paint markers mf paint markers s paint markers temperature sticks stainless steel lf metal scribers slcrc markers marking kits vaf ink markers cft ink markers product chart
 
   
 
 
 
Smooth writing Nissen Solid Paint Markers make marking smooth, fast and easy.
The markers are solid sticks of paint protected by an unbreakable plastic case.  They can be conveniently and cleanly carried in your pocket.  The plastic case prevents the paint from drying out so it always writes easily and smoothly. 
The case also allows you to use the entire stick without needing a separate holder.
· Marks on metal, wood, plastic, glass, cardboard, textiles, etc.
· Writes on any surface: rough or smooth; wet, oily or dry. Even marks under water.
· Marks won't run.
· Marks are permanent; they won't chip, peel, fade or rub-off. They withstand heat and  weathering
   under adverse conditions.
· If desired, marks can be removed from non-porous surfaces with standard industrial solvents.
· Available in 4 fast-drying, lead-free colours.
· Available in Standard (approximately 5/16 in. wide line) and Jumbo (approximately 1/2 in. wide line) versions.
 
SOLID PAINT MARKERS
ITEM COLOUR POINT SIZE
SPWHS WHITE STANDARD
SPWHJ WHITE JUMBO
SPBKJ BLACK JUMBO
SPBKS BLACK STANDARD
SPREJ RED JUMBO
SPRES RED STANDARD
SPYEJ YELLOW JUMBO
SPYES YELLOW STANDARD
 
 
 
The Nissen Marker A is a stick of paint in a solid form in a cardboard holder.
· Marks on metal, wood, plastic, glass, cardboard, textiles, etc.
· Marks on any surface: rough, smooth, wet, oily or dry.
· Marks are permanent; they won't chip, peel, fade or rub off. 
   They withstand heat and weathering.
· Markers are economical.
· Available in eight fast-drying, lead-free colors.
· Size is 11/16" x 4 7/8".
     
 MARKER-A
ITEM COLOUR POINT SIZE
MAWH WHITE 11/16 INCH X 4 7/8 INCH
MAYE YELLOW 11/16 INCH X 4 7/8 INCH
MABK BLACK 11/16 INCH X 4 7/8 INCH
MARE RED 11/16 INCH X 4 7/8 INCH
MABU BLUE 11/16 INCH X 4 7/8 INCH
MAGN GREEN 11/16 INCH X 4 7/8 INCH
MAOR ORANGE 11/16 INCH X 4 7/8 INCH
MAAL ALUMINIUM 11/16 INCH X 4 7/8 INCH
 
 
 
The Nissen Penamark-S is a stick of paint in a solid form designed especially for fabricators. Marks placed on bare metal will bleed through the oil-based primer and remain visible.
The penetrating action can be stopped, so as not to bleed through the final coating.
· Marks on any surface: rough, smooth, wet, oily or dry.
· Available only in blue.
· Size is 11/16" x 4 1/2".
     
 PENAMARKER-S
ITEM COLOUR POINT SIZE
PMS BLUE 11/16 INCH X 4 1/2 INCH
 
 
 
The Nissen High Temperature-S Marker is a stick of paint in a solid form designed to mark hot surfaces ranging from 150ºF to 1200º F.
· Marks will not run, peel or discolor.
· Marks withstand weathering.
· Markers are economical.
· Available only in white.
· Size is 9/16" x 5".
     
 HIGH TEMPERATURE-S
ITEM COLOUR POINT SIZE
HTS WHITE 9/16 INCH X 5 INCH
 
 
 
The Nissen Very High Temperature-S Marker is a stick of paint in a solid form designed to mark hot surfaces ranging from 250ºF to 1600º F.
· Marks will not run, peel or discolour.
· Marks withstand weathering.
· Markers are economical.
· Available only in white.
· Size is 9/16" x 5".
     
 VERY HIGH TEMPERATURE-S
ITEM COLOUR POINT SIZE
VHTS WHITE 9/16 INCH X 5 INCH
 
  Copyright ⓒ AUSGIANT MARKING SYSTEMS PTY LTD (MARKING MACHINERY & TOOLS) All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.com.au