|
| |
|
|
 |
|
|
|
 |
|
TG80M PAD PRINTER
The Tampograf
pad-printing machines have been leaders in the decoration for the Ofthalmic industry
for many years.
We have pleasure in presenting the TG80Marker
for the marking of multifocal lenses.
This machine is completely pneumatic, it requires no adjustments, identifies the
lens to be printed automatically - left, right or both.
|
|
|
 |
|
We see the sequence of the special system of blocking multifocal
lenses for any diopter above.
The exclusive swinging device is the real tour de
force of the TG80Marker. Therefore, the lenses
can be positioned particularly, during the procedure of positioning of
lenses, thus excluding the most common parallelism error. |
|
|
 |
|
TG150NEV PAD PRINTER
ADVANCED ELECTRO-PNEUMATIC OFFSET PRINTING MACHINES UTILISING FLEXIBLE IMAGE
TRANSFER PADS.
With a large electro-pneumatic format, This flexible easy to use sealed cup pad
printing machine can be supplied with either a traditional back - forward
cup movement or, to maximise potential length of printing area, our patented
transversal doctoring system.
The TG150 is extremely versatile and can be tooled with cliché plates of various dimensions up to 850 mm length and optional ink-cup sizes to 90,
135, 160 and 180 mm.
Maximum pad-pressure of 5500, 3600 or 1800 N can be selected on order.
The TG150 can be synchronised with any automatic line or loaded and
unloaded manually.
|
|
|
|
FEATURES |
|
·
Change of ink and cliché
in a few seconds
·
Robust construction and
varnished with powder resistant paint
·
Machine is
electro-pneumatic, commands extremely easy to use
·
Pinned cliché, so no need
for registration
·
Hermetic ink-cup with
patented push-on reversible ceramic ring, so doubles working life
·
Built-in device to vary
the inter-axis between the ink-cups only in the traditional version
·
Can print on any level
(even lower than the level of the cliché)
·
The machine can
immediately restart work after long periods of inactivity |
|
|
TECHNICAL DATA |
|
|
·
Production per hour
adjustment: approximately 800 - 900 pieces per hour and dry run
·
Cliché holding table can
be supplied with diameter from 250 x 650 to 250 x 850 mm
·
Cliché plate: 5 variable (user defined) sizes of thin steel or
photopolymer cliché plate
up to a maximum 250 x 850 mm with 2 punched
location holes.
Other sizes which can be
utilised are 250 x 395, 250 x 450, 250 x 585 and 250 x 750
mm
·
Printable area is
dependant on size and number of ink-cups employed
·
Pad-holder: fixed magnetically to slide allows rapid
set-up
·
Working cycle: single, continuous, step by step or
commanded by an external line, ink remixing
·
Pad force can be
regulated by operator constantly during working cycles
·
Pad stroke: down travel
up to maximum 200 mm
·
In/Out: with sensor for end of stroke and presence of
substrate built into the machine
·
Feed: compressed air 6
BAR
·
Main supply: 240 Volts - 50 Hz
·
Piece-holding turret:
adjustment on axes x, y, z and r. for fine regulation
·
Dimensions: 1000 x 1700 x
1900 mm
·
Options: automatic scotch tape pad cleaning device |
|
|
|
