|
| |
|
|
 tg30 pad printer CUTTING
& PRINTING |
|
|
|
ADVANCED OFFSET
PRINTING SYSTEMS WITH FLEXIBLE TRANSFER PADS
This is a technical process in which a flexible
pad transfers a film of indelible ink from an etched plate
(clichè) directly into the surface of an object of
any shape or size made of any material. The surface of the object can be
spherical, concave, convex, irregular, even very irregular, smooth or rough. In pad printing, we speak broadly of the transfer of words or images in
indelible ink, but such transfer can also be made in varnish, glue, powders,
etc.
Pad-printing can be used on objects of various
material, such as plastic, glass, ceramics, wood, etc., with the one
recommendation to use its specific ink. So, for its extreme
adaptability, pad-printing finds application in the most varied sectors
of the market, especially high-tech industrial products.
The
system of pad-printing is utilised to mark, print, engrave, decorate,
protect and glue. It allows even the finest lines to be reproduced with
clearness, in one or more colours, printing wet on wet.
|
|
|
 |
|
TG30 PAD PRINTER
The Model TG30 is a small format, flexible and easy to use-sealed cup pad printer.
The
TG30 is a high speed single colour hand loaded and unloaded semi-automatic
machine complete with x, y z and r, cross table.
The
technology ensures minimal solvent evaporation and
allows single pack inks to be left in situ in the machine indefinitely
for ongoing work.
|
|
|
FEATURES |
|
·
Ink-cup cycle with or without pad operation
·
Quick release fittings for ink-cups and cliché
plate
·
Fast machine set up without the need of tools
·
Robust machine construction all varnished with solvent
resistant paint
·
Completely pneumatic 6 BAR
·
Completely fireproof
·
Safe and easy to operate controls
·
Pinned cliché plate avoids registration problems.
·
Ink-cup with patented push-on reversible ceramic ring
·
Intelligent pad can print on any level (even lower than the level of the
cliché)
·
The machine can stay for long periods tooled and ready
to print |
|
|
TECHNICAL DATA |
|
·
Production adjustment:
maximum auto cycle speed 2200 print passes per hour
·
Ink-cup size: 90 mm diameter
·
Printable area: maximum 85 mm diameter using our patented hermetic ink-cups
·
Cliché plate: 93 x 200 mm in thin steel or high quality photopolymer
·
Pad fixing: quick release pad holder with magnetic x,
y, z adjustment
·
Working cycle: single, continuous, ink remixing
·
Pad force: 400 N
·
Pad stroke: variable air regulated down travel of pad up to a maximum of 55
mm and self-adjusting
·
In/Out: with sensor for end of stroke and for presence
of substrate built into the machine
·
Compressed air feed: 6 BAR
·
Piece-holding turret: cross table x, y, z and r for
fine regulations
·
Machine dimensions: 240 x 550 x 700 mm |
|
|
 |
|
TG60S PAD PRINTER
This
small extra-fast machine is the result of applied research and experience in
pad-printing technology.
The TG60S has been created to print large volumes of production and can be
inserted in any automatic line, even when space is limited due to its
small dimensions.
|
|
|
|
CHARACTERISTICS |
|
·
Change of ink and cliché in a few seconds
·
Rapid set up without the use of tools
·
Robust construction in fused aluminium and solvent resistant paint
·
Electro-pneumatic plant 6 BAR, 220 Volts and 50
Hz.
·
Completely fireproof
·
Extremely easy to operate
·
Pinned cliché
·
Hermetic ink-cup with patented doctor blade ring
in ceramic with 2 lips, so working life is doubled
·
Intelligent pad can print on any level (even lower than the level of the
cliché)
·
The machine can stay for long periods tooled and
ready to print |
|
|
TECHNICAL DATA |
|
|
|
|
|
·
Production adjustment: approximately 3600 per
hour dry run
·
Maximum diameter print: 55 mm using our patented hermetic ink-cup
·
Maximum diameter cliché: 70 x 140 mm in plastic or thin steel
·
Pad-holder: fixed magnetically to slide allows
rapid set-up without tools
·
Working cycle: single, continuous, commanded by an external line
·
Pad force: 300 N
·
Pad stroke: maximum 80 mm and self-adjusting
·
In/Out: with sensor for end of stroke and for
presence of substrate built into the machine
·
Feed: compressed air 6 BAR and electricity 220 Volts 50 Hz.
·
Piece-holding turret: adjustment on axes x, y, z and r
·
Dimensions: 100 x 585 x 342 mm |
|
|
|
|
