|
| |
|
| |
 |
|
|
| |
| |
|
 |
| |
The T3 Printer is a cost-effective, dot and line marking
system, which is designed especially for marking acceptance
and checking defective pipe manufacturing lines and
wire production lines.
The
printer is suitable for marking single dot and line at high printing speeds on a
wide range of both porous and non-porous surfaces.The
printer can operate with water-based inks, solvent-based inks and pigmented inks,
guaranteeing a high contrast and
highly visible mark.
|
| |
|
TECHNICAL SPECIFICATIONS |
|
ITEMS |
DESCRIPTION |
|
Marking distance |
Up to
25 mm |
|
Marking speed |
2 metres per second |
|
Marking size |
1 - 3.5 mm diameter |
|
Inkjet type |
Drop On Demand |
|
Nozzle open time |
1 Hour |
|
Input signal |
DC24V Photocell, I/O signal, Speed Encoder |
|
Functions |
Delay, Speed & Dot Size , Purge |
|
Serial Interface |
RS485 |
|
Ink container |
2.5 Liters SUS Ink Container |
|
Air pressure |
6 bars, Ink container: 0.1 - 0.5 |
|
Ink |
MEK & Water Base |
|
Ink colour |
Black, Blue, Red, Green (Non - Pigment Base) |
|
| |
|
MODELS |
|
MODELS |
MARKER |
CONTROLLER |
DOT MARKING SIZE |
|
T3-S |
One controller with single marker |
7100 + |
2.5mm diameter |
|
T3-L |
One controller with single marker |
7100 + |
3.5mm diameter |
|
T3-S2 |
One controller with dual markers |
7200 + |
2.5mm diameter |
|
T3-L2 |
One controller with dual markers |
7200 + |
3.5mm diameter |
|
| |
| |
|
