| ¡¡ |
|
| ¡¡ |
 grapholight
laser marker LASER
MARKING |
|
|
| ¡¡ |
| |
|
| |
GRAPHOLIGHT
GL20 with manual Z axis |
| |
| THE
FOLLOWING GRAPHOLIGHT MODELS ARE AVAILABLE FOR THE DIFFERENT
REQUIREMENTS: |
| |
| GRAPHOLIGHT
GL 20,
Maximum Engraving Power Density = 20 Megawatt/mm©÷: |
It
is the new Nd:YAG diode pumped laser for high marking
quality. The laser is particularly suitable for
metals and many plastic materials. The integrated
markinghead and resonator group are so compact, light
and convenient for on-line applications.
It is ideal for low and medium productions. |
| |
| GRAPHOLIGHT
GL 40,
Maximum Engraving Power Density = 40 Megawatt/mm©÷: |
| The
universal marking laser is suitable for all metals and
non-metal materials, including the most part of the commercial
plastics, providing chromatic toning for easier reading.
With higher power, it is suitable for medium and high
productions. |
| |
| GRAPHOLIGHT
GL 80,
Maximum Engraving Power Density = 80 Megawatt/mm©÷: |
| The
laser with its 80 Megawatt/mm?power density is suggested
for high level productions and for high-contrast colour
markings |
| |
| GRAPHOLIGHT
GL
80/Green: |
| The
green light laser allows the so-called “cold marking?
The laser is mainly suggested for those types of plastics
that have difficulty in changing their surface colour
without burning. It is also used for marking or
ablation on very thin metal sheets without causing any
surface distortion. |
| |
| GRAPHOLIGHT
GL 80/UV: |
This
laser, with low wavelength in the Ultra Violet, provides
the so-called "cold marking".
Therefore, it is particularly suitable in all conditions
where the excessive heat of the conventional lasers could
damage the product structure such as ceramic chips, teflon,
glass, and so on. |
| |
| GRAPHOLIGHT
GL C-60 and GL C-100
Power:
60 W and 100 W: |
The
lasers provide very high power. They are designed for
the most varied application requirements.
These include deep, high speed engraving, high contrast,
high speed marking on all metals, 3D Die production, precision
cutting of precious and non-precious sheet metal, laser
scribing of ceramic substrates. |
| |
|
TECHNICAL SPECIFICATIONS |
Laser
Source
Wave Length
Maximum Engraving Power Density
Mode / Quality
Modulation |
Nd: YAG Diode Pumped
1064 nm
20 Megawatt/ mm©÷
TEM 00/M©÷ < 1, 2 - single mode
Typical 23 kHz |
| Laser Class |
IV , (optional laser
protection-housing class I) |
| Integrated Positioning
Laser |
635 nm, 3mW, Red, Class
2M |
Scanning Head
Nominal Focal Length
Marking Area
Minimum Spot Diameter |
63 mm
30x30 mm
15 ¥ìm
|
100 mm
60x60 mm
25 ¥ìm |
160 mm
110x110 mm
35 ¥ìm |
254 mm
170x170 mm
50 ¥ìm |
Electrical Connections
Power Supply
Power Consumption
Cooling System |
90 V - 240 V single phase, 50 - 60 Hz, 16 A
< 400 W
Integrated by air (No water required) |
Dimension
Rack (L x W x H)
Resonator with Marking Head |
500 x 180 x 450 mm, 19 kg
308 x 110 x 110 mm, 4 kg |
| Options |
Protection
housing class I (different solutions are available)
Motor-driven Z axis
Rotary fixture for cylindrical marking
Rotating table
Workstation and custom solutions |
|
| ¡¡ |
| ¡¡ |
