|
| |
|
| |
 |
|
|
| |
|
 |
| |
|
GRAPHOLIGHT
GL20 with manual Z axis |
| |
| THE FOLLOWING
GRAPHOLIGHT MODELS ARE AVAILABLE FOR THE DIFFERENT REQUIREMENTS: |
| |
GRAPHOLIGHT
GL 20,
Maximum Engraving Power Density = 20 Megawatt/mm˛:
It is the new Nd:YAG diode pumped laser for high marking quality.
The laser is particularly suitable for metals and many plastic
materials.
The integrated markinghead and resonator group are so compact, light
and convenient for
on-line applications.
It is
ideal for low and medium productions. |
| |
GRAPHOLIGHT
GL 40,
Maximum Engraving Power Density = 40 Megawatt/mm˛:
The universal marking laser is suitable for all metals and non-metal
materials, including the
most part of the commercial plastics,
providing chromatic toning for easier reading.
With higher
power, it is suitable for medium and high
productions. |
| |
GRAPHOLIGHT
GL 80,
Maximum Engraving Power Density = 80
Megawatt/mm˛:
The laser with its 80 Megawatt/mm˛ power density is suggested for high level
productions
and for high-contrast colour markings. |
| |
GRAPHOLIGHT
GL 80/Green:
The green light laser allows the so-called “cold marking“. The
laser is mainly suggested for
those types of plastics that have
difficulty in changing their surface colour without
burning.
It is also used for marking or ablation on very thin
metal sheets without causing any surface
distortion. |
| |
GRAPHOLIGHT
GL 80/UV:
This laser, with low wavelength in the Ultra Violet, provides the
so-called “cold marking“.
Therefore, it is particularly suitable in
all conditions where the excessive heat of the
conventional
lasers could damage the product structure such as ceramic chips, teflon,
glass, and so on. |
| |
GRAPHOLIGHT
GL C-60 and GL C-100
Power: 60 W and 100 W:
The lasers provide very high power. They are designed for the most
varied application
requirements.
These include deep, high speed engraving, high contrast, high
speed marking
on all metals, 3D Die production, precision cutting of
precious and non-precious sheet
metal, laser scribing of ceramic
substrates. |
| |
|
TECHNICAL SPECIFICATIONS |
|
Laser Source
Wave Length
Maximum Engraving Power Density
Mode / Quality
Modulation
|
Nd: YAG
Diode Pumped
1064 nm
20 Megawatt/ mm˛
TEM 00/M˛ < 1, 2 - single mode
Typical 23 kHz |
|
Laser Class
|
IV , (optional laser protection-housing class I) |
|
Integrated Positioning Laser
|
635 nm, 3mW, Red, Class 2M |
Scanning Head
Nominal Focal Length
Marking Area
Minimum Spot Diameter |
63 mm, 100
mm 160
mm 254
mm
30x30 mm 60x60 mm 110x110
mm 170x170 mm
15 µm 25 µm 35 µm 50 µm |
Electrical Connections
Power Supply
Power Consumption
Cooling System |
90 V - 240 V single phase, 50 - 60 Hz, 16 A
< 400 W
Integrated by air (No water required) |
Dimension
Rack (L x W x H)
Resonator with Marking Head |
500 x 180 x 450 mm, 19 kg
308 x 110 x 110 mm, 4 kg |
|
Options |
Protection housing class I (different solutions are
available)
Motor-driven Z axis
Rotary fixture for cylindrical marking
Rotating table
Workstation and custom solutions |
|
| |
|
 |
| |
| |
|
