overview
hot stamping hot stamping wp 407 inkjet printer wp 405 inkjet printer m 100l fg-tt uv laser m 100l 20 uv laser m 100l 50 uv laser pvc pipe hot stamper pvc pipe hot stamper pvc pipe hot stamper
 
   
 
m 100l fg-tt uv laser        CABLE MARKING
 

Our customers are Boeing, British Aerospace, Cessna, Fokker, Lockheed, Northrop, U.S. Navy, etc.
 
The M 100L FG-TT is a table-top, fully automatic, computer controlled, high speed, solid state UV Laser cable and wire marking system.  The M 100L FG-TT complies with MIL50881, AS50881, BAC5152 and SAE ARP5607 (Legibility of Print). 

The M 100L FG-TT can mark various materials.  These materials are ETFE and FEP like airbus CF Teflon wrapped, tape wrapped wire, polyimide wire, extruded wires such as Teflon and Tefzel.

The M 100L FG-TT is portable, fully automatic, turnkey marking system that utilises a UV solid state laser with an integrated high speed scanner. User friendly software allows unlimited font selection (any true type font for any language) and full graphics capabilities (pictures, logos, barcodes, etc).
The M 100L FG-TT supports both vertical and horizontal text orientation, programmable message spacing, 3 separate zones of print with variable separation spaces and source and destination coding on wire ends.
 
FEATURES:
 
- Easy (13.5 seconds) loading unloading
- Dual stepping motor pulling for accurate marking and precise length cutting of round wires and twisted cables alike
-
-
-
-
-
-
-
-
-
-
-

Meets MIL-W-5088L, AS-5088-L, as well as SAE ARP5607 (Legibility of print)
Qualified per the BAC5152 specification
Pneumatic cutter
Powered coil pan
Single coil wire prefeed
Wire throughput: up to 40 ft/min depending on font size
Wire gauges: from 26 to 6 (0.75 to 6.3 mm)
Wire and cable jacket materials: PTFE, TFE, PEF, ETEF, XL-ETFE, etc.
Laser markable wire types: BMS 13-48, BMS 13-60, Raychem spec 55, AS22759/16-19, 32-46, 80-92, etc
Integrated laptop computer
Microsoft WindowsóÔ control application

 
OPERATIONAL CONDITIONS:
 
- Ambient temperature 15C to 30°C
- Relative humidity 20 to 80%
- Tabletop unit 30" wide x 20" deep x 23" high
- Weight: 75 lbs
 
LASER MARKER:
 
- 355 nm solid state UV YAG Laser, Class 1 for use on open shop floor
- Full graphics capability, including upper and lower cases of alphanumeric characters
- Unlimited font and size selection and orientation
- Marking spacing from 2.5 mm to 2500 mm
- Three different messages and variable mark spacing along wire length capable
 
WIRE HANDLING:
 
- Single or dereeler
- Powered coil pan
- Precision caterpillar belt type encoder for round wire and twisted cable
- Belt type wire pulling mechanism for round wire and twisted cable
- Pneumatic cutter
 
WIRE PROCESSING:
 
- Machine speed of wire output is up to 25 feet per minute
- Wire sizes 0.75 mm to 6.3 mm
- Single or multi-core cable
- Minimum and maximum cable length from 6 inch to 4,000 inches
- Any UV laser markable wires, including , but not limited to TKT/TK wires such as BMS 13-60, M22759/80-92,
   ETFE, XL-ETFE such as BMS 13-48, M22759/32, etc.
 
 
  Copyright ʤ AUSGIANT MARKING SYSTEMS PTY LTD (MARKING MACHINERY & TOOLS) All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.com.au
Click AUSGIANT PACKAGING SYSTEMS (WWW.AUSGIANT.NET.AU)